Kohler Command! Operates at 3600 RPM. 10 gallon fuel tank for long run time. 20-ft. electrode cable with holder and 15-ft. work cable with clamp included. Truck Ship. U.S.A. Kohler 20 HP OHV engineElectric start engine1/2 in. weld thickness10kW output with 230 Amp DC welder stick

"Weighs 10-20% less than the competition. 20 HP Onan OHV engine runs at 3600 RPM. DC weld output provides smooth arc performance and easy starts. Has four 120V, 20 Amp and one 120/240V, 50 Amp receptacles with push-button reset circuit breakers. &;No tools&; oil changes. Heavy duty construction and enclosed engine design prevents damage while in transport. Includes 20 ft. electrode cable with holder and 15 ft. work cable with clamp. 33 in. H x 18 3/4 in. W x 37 1/2 in. D. Cart NOT included. Truck Ship. U.S.A. Combines a 10,000 Watt generator with a 230 Amp constant-current DC welder 10 gallon fuel tank for extended run time"

"ß Generator produces 4500 Watt surge power; 4000 Watts continuous power with a dependable recoil-start Briggs & Stratton 8 HP OHV engine ß 140 Amp output for excellent stick welding performance Easily handles 1/8"" electrodes to weld steel, stainless steel and cast iron up to 1/4"" thick. Includes 10 of cable with electrode holder and 10 of work cable with clamp. 30% duty cycle @ 140 Amps, 20 Volts. Two 20 Amp, 120 Volt outlets and two 240 Volt CSA-approved receptacles with circuit breakers. Model 500491. Truck ship. Factory shipped."

"The 150STi is the BEST in its class! This lightweight ( only 13.7 lbs.) welder is an excellent inverter–based, DC power source with simple–to–use operator interface. Features a single amperage range — operator sets amperage on 115V or 230V primary power. Low OCV stick reduces open—circuit voltage to 13 Volts when power source is not in use, eliminating the need for add–on voltage reducers. Hobart 5/3/1 limited warranty. U.S.A. Adaptive Hot Start for easy arc startsBuilt–in gas solenoid eliminates need for bulky torch with gas valveAuto–Line automatically connects to 115–230VAC single–phase powerLift–Arc Start for TIG arc starting without use of high frequencyInternal controls with inverter–based technologyThermal overload protectionIncludes 13ft. electrode holder, 10ft. work clamp, shoulder strap, primary cord, torch with adapter, gas hose, regulator, 12ft. TIG torch with remote control fingertip and black plastic carrying caseModel 500504–01–2"

"Use the electrode to either A) stick and pull, or B) weld studs or wiggle wire for hand pulling. Unit is battery operated for maximum portability, yet has amperage output equal to 220V shop models! Pulls hundreds of times on a single charge. Excellent shrinking capabilities. Includes control handle with shrink tip, automatic timer, 10ft. leads, dent pulling bar, nail and stud adaptors, extra electrodes and more. Truck Ship. U.S.A."

"Ideal for welding steel or aluminum in the field or at the job site. Operates on 2 12V, a 24V or 36V battery Microprocessor control with optical encoder Die-cast aluminum chassis Two 2-lb. spools of solid (MIG/MAG) and flux-core self-shielding wire from .023 to .045 dia. Weld material up to 1/2in. thick 200+ Amp output 20ft. ground cable with clamp 20ft. gas line Battery clamp wire harness Gas valve assembly Nossle 2 packs of contact tips Instruction manual"

"Versatile 35-235 Amp welding range delivers enough power to weld 1/4in. steel Runs any type of DC or AC electrode, overhead and vertical Includes 10ft. ground cable and clamp, 12ft. welding lead and electrode holder, full wheel kit with heavy-duty handle and more 5-year limited warranty on transformer/rectifier; 2-year limited warranty on welder parts. Model 84241"

"235 Amp max. output. Rated for 20% higher output than competitive welders. 230V single phase output. Two AC amperage ranges with continuous adjustment plus DC welding option for smooth performance. Welding time increases as amperage decreases. Simple range switch. Infinite current control for fine adjustment and optimum control. Less spatter and greater control on thin materials plus easier out-of-position welding. With cooling fan, electrode holder, work lead, replaceable weld cables and power cord. Truck Ship. U.S.A."

"The patented Accu-Set® design provides accurate heat control and infinite amperage control to get the exact heat needed which allows weld time to increase when amperage decreases. Rated output of 165 Amps @ 25 VAC with a 20% duty cycle. Duty cycle increases as amperage setting decreases; 100% duty cycle @ 90 Amps, 25V. Welding amperage range of 30 to 205 Amps. Fully varnished magnetic coils for enhanced coil reliability and longer life. Forced-draft cooling fan runs continuously and helps extend life of power source. Maximum 80 Open-circuit voltage assists with arc starting and arc stability. Comes complete with 12 ft. electrode cable with heavy-duty holder, 10 ft. work cable with clamp and primary input cord with plug. 3-year limited warranty. 1/2 in. weld thickness"

"Welds up to 1/4in. steel and operates on 120 Volt, 20 Amp circuit Handles .030in. and .035in. flux core wire on 2 lb. spools Self-adjusting wire speed for simple operation Includes thermal overload protetion, cables with torch pre-attached, welding mask, chipping hammer/brush and ground clamp UL listed welder comes with 2 year limited warranty"

"Truck Ship. Low frequency output wont interfere with electronicsSingle-phase unit has exclusive built-in arc assist for both AC and DC and TIG plus foot control for easier useProcess switch automatically sets for TIG or stick weldingAC/DC rated output at 20% duty cycle: 150 Amps at 15VAC Amp range is 20 to 165; DC Amp range is 23 to 132230V, 60 Hz unit measures 18in. H x 13in. W x 25 1/2in. DIncludes TIG torch, 12-ft. work cable and clamp, 15-ft. stick electrode holder, gas regulator and hose plus instructional videoThis item is factory shipped"

"Truck Ship. Low frequency output wont interfere with electronics Single˜phase unit with built˜in arc assist for both AC and DC TIG plus fingertip control Process switch automatically sets for TIG or stick Rated output at 20% duty cycle: 150 Amps at 15V AC Amp range 20 to 165; DC Amp range 23 to 132 230V, 60 Hz unit measures 18in. H x 13in. W x 25 1/2in. D Includes TIG torch, 12-ft. work cable and clamp 15˜foot stick electrode holder, gas regulator and hose PLUS instructional video; U.S.A."

Complete Firepower FP 100 Weld System - The model FP 100 stick welder can be used for many welding jobs. This light 27 lb. unit allows adjustable welding output to 85 amps AC with a 15% duty cycle. Welds 18 gauge to 3/16" steel. Use the included Stitch Welder (19045) to weld sheet metal as thin as 22 gauge. Use the Spot Welder (19089) to duplicate spot welds. The FP 100 includes permanently installed 6'cables with attached ground and stick holder, Spot and Stitch Welders, 2 electrodes for the Spot Welder and complete instructions. Welding shield/helmet Not included. We recommend the (19012) welding helmet.

Versitile Stick Welder From Firepower - The model FP 100 stick welder from Firepower can be used for a variety of welding jobs. This light 27 lb. unit features adjustable welding output to 85 amps AC with a 15% duty cycle. Easily welds 18 gauge up to 3/16" steel. When used with the Stitch Welder (19045) this welder can handle sheet metal as thin as 22 gauge. Use the Spot Welder (19089) to duplicate spot welds. The FP 100 includes permanently installed 6' cables with attached ground clamp and stick holder, and complete instructions. Welding shield/helmet Not included. We recommend the (19012) welding helmet.