Kohler Command! Operates at 3600 RPM. 10 gallon fuel tank for long run time. 20-ft. electrode cable with holder and 15-ft. work cable with clamp included. Truck Ship. U.S.A. Kohler 20 HP OHV engineElectric start engine1/2 in. weld thickness10kW output with 230 Amp DC welder stick

"Weighs 10-20% less than the competition. 20 HP Onan OHV engine runs at 3600 RPM. DC weld output provides smooth arc performance and easy starts. Has four 120V, 20 Amp and one 120/240V, 50 Amp receptacles with push-button reset circuit breakers. &;No tools&; oil changes. Heavy duty construction and enclosed engine design prevents damage while in transport. Includes 20 ft. electrode cable with holder and 15 ft. work cable with clamp. 33 in. H x 18 3/4 in. W x 37 1/2 in. D. Cart NOT included. Truck Ship. U.S.A. Combines a 10,000 Watt generator with a 230 Amp constant-current DC welder 10 gallon fuel tank for extended run time"

"Truck ship. Factory shipped. 230 Volts with up to 250 Amps welding output; 60% duty cycle @ 200 AmpsWelds 24-gauge sheet metal to 1/2in. thick steel with single pass welding 60% duty cycle @ 155 Amps gives extended welding timeSpot welding timer control for repeating and precise spot weldsFeatures 7 separate heat settingsNewly designed cart rides lower to ground and has side spool loadingIncludes 12ft. heavy-duty welding gun, dual-gauge adjustable gas regulator and fittings (cylinder not included), spare tips and nozzles, starter spool and more 5-year limited warranty on transformer/rectifier2-year limited warranty on welder partsModel 83260"

"ß Generator produces 4500 Watt surge power; 4000 Watts continuous power with a dependable recoil-start Briggs & Stratton 8 HP OHV engine ß 140 Amp output for excellent stick welding performance Easily handles 1/8"" electrodes to weld steel, stainless steel and cast iron up to 1/4"" thick. Includes 10 of cable with electrode holder and 10 of work cable with clamp. 30% duty cycle @ 140 Amps, 20 Volts. Two 20 Amp, 120 Volt outlets and two 240 Volt CSA-approved receptacles with circuit breakers. Model 500491. Truck ship. Factory shipped."

"230 Volts with up to 210 Amps welding output makes this unit ideal for serious welding Welds 24-gauge sheet metal to 3/8in. thick steel with single pass welding 60% duty cycle @ 155 Amps gives extended welding time Spot welding timer control for repeating and precise spot welds Features 7 separate heat settings Newly designed cart rides lower to ground and has side spool loading Includes12ft. heavy-duty welding gun, dual-gauge adjustable gas regulator and fittings (cylinder not included), spare tips and nozzles, starter spool and more 5-year limited warranty on transformer/rectifier; 2-year limited warranty on welder parts Model 83180.Truck shipped. Factory shipped"

"The 150STi is the BEST in its class! This lightweight ( only 13.7 lbs.) welder is an excellent inverter–based, DC power source with simple–to–use operator interface. Features a single amperage range — operator sets amperage on 115V or 230V primary power. Low OCV stick reduces open—circuit voltage to 13 Volts when power source is not in use, eliminating the need for add–on voltage reducers. Hobart 5/3/1 limited warranty. U.S.A. Adaptive Hot Start for easy arc startsBuilt–in gas solenoid eliminates need for bulky torch with gas valveAuto–Line automatically connects to 115–230VAC single–phase powerLift–Arc Start for TIG arc starting without use of high frequencyInternal controls with inverter–based technologyThermal overload protectionIncludes 13ft. electrode holder, 10ft. work clamp, shoulder strap, primary cord, torch with adapter, gas hose, regulator, 12ft. TIG torch with remote control fingertip and black plastic carrying caseModel 500504–01–2"

"Use the electrode to either A) stick and pull, or B) weld studs or wiggle wire for hand pulling. Unit is battery operated for maximum portability, yet has amperage output equal to 220V shop models! Pulls hundreds of times on a single charge. Excellent shrinking capabilities. Includes control handle with shrink tip, automatic timer, 10ft. leads, dent pulling bar, nail and stud adaptors, extra electrodes and more. Truck Ship. U.S.A."

"Ideal for welding steel or aluminum in the field or at the job site. Operates on 2 12V, a 24V or 36V battery Microprocessor control with optical encoder Die-cast aluminum chassis Two 2-lb. spools of solid (MIG/MAG) and flux-core self-shielding wire from .023 to .045 dia. Weld material up to 1/2in. thick 200+ Amp output 20ft. ground cable with clamp 20ft. gas line Battery clamp wire harness Gas valve assembly Nossle 2 packs of contact tips Instruction manual"

"Hobarts MIG welder handles a variety of solid, mild steel or stainless, flux cored and aluminum wires, with or without shielding gas. Operates on 230V power. FREE Hobart welding cart for better portability. Hobart 5/3/1 limited warranty. U.S.A. Amerage output range of 25 to 180 Amps30% duty cycle @ 130 Amps, 20V4 output voltage settings with wire feed tracking for quick and easy adjustments and one “purge” settingWelds 24-gauge up to 5/16in.Features built-in contactor and self-resetting thermal overload protectionIncludes gun, gas valve, regulator hose and 10ft. work lead with clamp8in. wire spool adapter, .030in. contact tips and a 2-lb. spool of .030in. self-shielded flux core welding wireIncludes FREE Hobart welding cartModel 500506"

"Welds uncoated mild steel up to 3/16in. combined thickness Quick, easy adjustment for material thickness Includes 6in. tongs; CSA approved; made in U.S.A."

"Hobart&127;s MIG welder handles a variety of solid, mild steel or stainless, flux cored and aluminum wires; with or without shielding gas. Operates from 115V standard household current. Hobart 5/3/1 limited warranty. U.S.A. Amperage output range of 25 to 140 Amps20% duty cycle @ 90 Amps, 19 Volts4 output voltage settings with wire feed tracking and “purge” settingWelds 24–gauge up to 1/4in.Features built–in contactor and self–resetting thermal overload protectionIncludes gun, gas valve, regulator and hose, 10ft. work lead with clamp, power cord, 8in. wire spool adapter, extra .030in. contact tips2–lb. spool of .030in. self–shielded flux cored wireModel 500500"

"Weld steel, stainless steel and aluminum; welds 22–gauge to 3/4 in.Connects to batteries: 12 V for thin metal, 24V for single–pass 1/2 in. @ 275 Amp, 36V for up to 3/4 in. @ 350 to 400 AmpAC to DC power converter to supply 24V DC to the welder circuitry when connected to constant stick welding machinesOutput range of 30–250 Amps @ 24 to 36V DCRated output is 200 Amps @ 24V DC with 100% duty cycle275 Amps @ 24V with 70% duty cycle on DC powerAccepts wire .023 to 3/64 in. without changing rollersFive port switch with five separate range selectionsIncludes: MIG gun, 10 ft. welding cable, 1 ground clamp, 1 spool of steel flux core wire, 2 battery clamps, and extra tips and gas hose fittingU.S.A."

"Plugs into any standard 115 Volt household outWelds uncoated mild steel up to 1/8in. combined thicknessQuick, easy adjustment for material thicknessIncludes 6in. tongsCSA approvedU.S.A."

"Versatile 35-235 Amp welding range delivers enough power to weld 1/4in. steel Runs any type of DC or AC electrode, overhead and vertical Includes 10ft. ground cable and clamp, 12ft. welding lead and electrode holder, full wheel kit with heavy-duty handle and more 5-year limited warranty on transformer/rectifier; 2-year limited warranty on welder parts. Model 84241"

"235 Amp max. output. Rated for 20% higher output than competitive welders. 230V single phase output. Two AC amperage ranges with continuous adjustment plus DC welding option for smooth performance. Welding time increases as amperage decreases. Simple range switch. Infinite current control for fine adjustment and optimum control. Less spatter and greater control on thin materials plus easier out-of-position welding. With cooling fan, electrode holder, work lead, replaceable weld cables and power cord. Truck Ship. U.S.A."

"Welds mild steel from 20 to 12 gauge. For gasless flux-cored .035in. wire welding. Produces MIG (gas) welds with our #164351 Conversion Kit, call to order separately. 115 Volt, 60 Hz, 20 Amps input. Rated DC output of 88 Amps @ 18 Volts, 20% duty cycle. Max 32 open circuit Volts. Wire speed 50in. to 300in. per minute. Uses 4in. O.D. x .62in. I.D. x 1.7in.W spools. You get welder, gun and cable, 1-lb. spool of .035in. self-shielded wire, work clamp and cable, welding shield, spare tip and FREE video. 12in.H x 9 3/4in.W x 16 1/2in.D (less handle). 3-year limited warranty. CSA certified and UL listed. U.S.A."

"Rugged constant-voltage DC welder with built-in wire feeder; operates from 115V standard household current Ready to weld without shielding gas, using .030in. to .035in. self-shielding flux cored wire Great unit for outdoor applications when shielding gas could be blown away Rated output of 90 Amps, 19 VDC @ 20% duty cycle; 63 Amps, 21 VDC @ 20% duty cycle with current range of 30-125 Amps Welds up to 3/16in. steel with flux cored wire Includes H-9 gun, 8-ft. with liner for .023in.-.035in. dia. wire 10-ft. work lead with clamp, power cord, three .030in. contact tips 1-lb. spool of .030in. self-shielded flux cored wire MIG gas upgrade kit available for greater versatility (see Item# 164796) 5-year limited warranty on transformers, 3-year limited warranty on electronics and 1-year limited warranty on guns; U.S.A."

Ergonomically designed welding gun Contact tips and nozzles Wedling Shield Ground Clamp Starter spool of wire Instruction book

"The patented Accu-Set® design provides accurate heat control and infinite amperage control to get the exact heat needed which allows weld time to increase when amperage decreases. Rated output of 165 Amps @ 25 VAC with a 20% duty cycle. Duty cycle increases as amperage setting decreases; 100% duty cycle @ 90 Amps, 25V. Welding amperage range of 30 to 205 Amps. Fully varnished magnetic coils for enhanced coil reliability and longer life. Forced-draft cooling fan runs continuously and helps extend life of power source. Maximum 80 Open-circuit voltage assists with arc starting and arc stability. Comes complete with 12 ft. electrode cable with heavy-duty holder, 10 ft. work cable with clamp and primary input cord with plug. 3-year limited warranty. 1/2 in. weld thickness"

"Economical and versatile 120 Volt MIG welder for household repair and building projects Welds 18-gauge sheet metal up to 3/16in. thick Plugs into standard 120 Volt 15 Amp wall outlet Features 2 separate heat settings; automatic wire feed speed control Uses .030in. flux-core welding wire on 4in. spools; no shielding gas needed Sturdy wire-feed design and multi-insulated transformer for reliable operation and long life Includes professional-quality welding gun, welding nozzle and contact tip, welding shield, starter spool of wire and more 5-year limited warranty on transformer/rectifier; 2-year limited warranty on welder parts. Model 83073"

"Welds up to 1/4in. steel and operates on 120 Volt, 20 Amp circuit Handles .030in. and .035in. flux core wire on 2 lb. spools Self-adjusting wire speed for simple operation Includes thermal overload protetion, cables with torch pre-attached, welding mask, chipping hammer/brush and ground clamp UL listed welder comes with 2 year limited warranty"

"Ultra-heavy-duty welding rig is construction-site ready and made to withstand rugged use. Plenty of storage for torche, hose, all welding accessories. Does not include tanks. Truck Ship. 16in. x 4in. pneumatic tires 1000-lb. capacity lifting hook In-tip mixing Stainless steel pigtail hoses 2 regulators 25ft. twin gas hose Goggles Strikers"

"Truck Ship. Low frequency output wont interfere with electronicsSingle-phase unit has exclusive built-in arc assist for both AC and DC and TIG plus foot control for easier useProcess switch automatically sets for TIG or stick weldingAC/DC rated output at 20% duty cycle: 150 Amps at 15VAC Amp range is 20 to 165; DC Amp range is 23 to 132230V, 60 Hz unit measures 18in. H x 13in. W x 25 1/2in. DIncludes TIG torch, 12-ft. work cable and clamp, 15-ft. stick electrode holder, gas regulator and hose plus instructional videoThis item is factory shipped"

"Complete with one 20 cu.˜ft.“R” oxygen cylinder and one “MC” acetylene cylinder. Popular welding and cutting outfit is excellent for general maintenance, auto repair, air conditioning and more. Welds up to 3/16in. and cuts up to 1/2in. steel. You also get torch handle, cutting attachment and tip, welding nozzle, 12 1/2-ft. hose, goggles, striker, acetylene key, tough polypropylene carrier and oxygen & acetylene regulators. UL listed. Victor® compatible. Includes check valve. Two year limited warranty."

"Weld steel, stainless steel and aluminum; welds 22–gauge to 3/4 in.Connects to batteries: 12 V for thin metal, 24V for single–pass 1/2 in. @ 275 Amp, 36V for up to 3/4 in. @ 350 to 400 AmpAC to DC power converter to supply 24V DC to the welder circuitry when connected to constant stick welding machinesOutput range of 30–250 Amps @ 24 to 36V DCRated output is 200 Amps @ 24V DC with 100% duty cycle275 Amps @ 24V with 70% duty cycle on DC powerAccepts wire .023 to 3/64 in. without changing rollersFive port switch with five separate range selectionsIncludes: MIG gun, 10 ft. welding cable, 1 ground clamp, 1 spool of steel flux core wire, 2 battery clamps, and extra tips and gas hose fittingU.S.A."

"Truck Ship. Infinite wire feed speed control from 90 to 650 ipm 6 tap voltage control Excellent short arc performance; sloped front panel 10-ft. 100 Amp #:M10 mig welding gun Fully assembled 3 year warranty, with 1 year warranty on gun Includes regulator, gas flow gauge, hose and 1 lb. of .030 flux wire and more; U.S.A."

"Infinite wire feed speed control from 90 to 750 ipm allows you precise adjustment of penetration and weld bead shape. 7 tap design gives you easy heat or voltage range selection. Excellent short arc performance for easy control over weld puddle. Front panel is sloped for easy access. Thermal overload protection. Draws 34 Amps at rated load of 200A, 60% duty cycle. Measures 36 1/2 in. L x 18 ft. 7/8 in. W x 31 1/4 in. H. With 12-ft. 200 Amp MIG welding gun, 10-ft. work cable and clamp, 5-ft. gas hose with fittings, 10-ft. input cable, 10-lb. spool of .035 in. solid wire and more. Truck Ship."

"Truck Ship. Low frequency output wont interfere with electronics Single˜phase unit with built˜in arc assist for both AC and DC TIG plus fingertip control Process switch automatically sets for TIG or stick Rated output at 20% duty cycle: 150 Amps at 15V AC Amp range 20 to 165; DC Amp range 23 to 132 230V, 60 Hz unit measures 18in. H x 13in. W x 25 1/2in. D Includes TIG torch, 12-ft. work cable and clamp 15˜foot stick electrode holder, gas regulator and hose PLUS instructional video; U.S.A."

"Hobarts MIG welder handles a variety of solid, mild steel or stainless, flux cored and aluminum wires; with or without shielding gas. Operates from 115V standard household current. FREE accessory kit includes flip-front helmet with 4 1/2in. x 5 1/4in. lens, pair of deluxe welding gloves and chipping hammer with brush. Hobart 5/3/1 limited warranty. U.S.A. Amperage output range of 25 to 140 Amps20% duty cycle @ 90 Amps, 19V4 output voltage settings with wire feed tracking and “purge” settingWelds 24-gauge up to 1/4in.Features built-in contactor and self-resetting thermal overload protectionIncludes gun, gas valve, regulator and hose, 10ft. work lead with clamp, power cord, 8in. wire spool adapter, extra .030in. contact tips2-lb. spool of .030in. self-shielded flux cored wireFREE accessory kit includes flip-front helmet with 4 1/2in. x 5 1/4in. lens, pair of deluxe welding gloves and chipping hammer with brushModel 500517"

"Hobarts MIG welder handles a variety of solid, mild steel or stainless, flux cored and aluminum wires, with or without shielding gas. Operates on 230V power. FREE Hobart welding cart for better portability. Hobart 5/3/1 limited warranty. U.S.A. Amerage output range of 25 to 180 Amps30% duty cycle @ 130 Amps, 20V4 output voltage settings with wire feed tracking for quick and easy adjustments and one “purge” settingWelds 24-gauge up to 5/16in.Features built-in contactor and self-resetting thermal overload protectionIncludes gun, gas valve, regulator hose and 10ft. work lead with clamp8in. wire spool adapter, .030in. contact tips and a 2-lb. spool of .030in. self-shielded flux core welding wireIncludes FREE Hobart welding cartModel 500506"

"Ready to weld up to 1/4in., and cut up to 1/2in. You get oxygen and acetylene regulators, cutting attachment, torch handle, mixer, 3/16in. x 20ft. hose, goggles, 3 welding and brazing tips, cutting tip, striker, instructions and carrying case. UL listed. Two year limited warranty."

"Medium duty set includes cutting attachment, cutting tip, welding handle, mixer, 3 welding tips, tip cleaner set, striker and instructions. UL listed, Victor® compatible. 2 year limited warranty."