Straight Offset Snips - Cuts straight or gradual curves to the right or left in up to 18 gauge stainless steel. Offset blades keep users hand above and away from sharp edges. Start cutting from edge or in the middle of a panel with a 3/8" starter hole. Drop forged blades and grade 8 center pivot bolt. Compound leverage eases cutting actions. Comfortable soft plastic handle grips. Limited lifetime manufacture's warranty. Made in the USA.

A unique push or pull cutting; can turn or rotate while cutting circles. Provides easier cutting in tight spaces and overhead. Elevates hands above metal working surfaces. Faster, easier and safer cutting for improved productivity. Cuts up to 24 gaugesheet metal (26 gauge stainless steel).

METAL SNIP SET 12:1 power ratio lets you cut with half the effort of regular snips Set includes 3 snips: left cut, right cut and straight cut Cut 16-gauge auto body metal. Drop-forged, heat-treated chrome-moly steel serrated jaws. Applications: All Makes All Models

AIR-POWERED NIBBLERS Cut up to 18-gauge sheet metal without distortion! Choose air-powered nibbler with a minimum hose size of 3/8" ID or 1/4" ID Heat-treated alloy steel head. Air inlet: 1/4"NPT. Air consumption at 90-psi: 4 scfm. Replacement punch/die (cutter) sets available separately. Applications: All Makes All Models

Pneumatic Shear - Uses a central cutting blade acting against 2 adjacent fixed blades to produce distortion free cuts in up to 18-gauge steel. Comfortable pistol grip. Adjustable up to 2500 strokes per minute. Requires 7 cfm at 90-120 psi. One-year manufacturer's warranty. Imported. For a replacement center blade order (28118C).

Convert Your Cordless Drill into a Portable Shear - Perfect for cutting out patch panels or body sections on your project car or in a salvage yard. Can be started in the middle of a panel with a 1" hole. The Heavy Duty Turbo Shear cuts up to 18 gauge steel. One handed operation. Fits most 14.4 volt or larger cordless drills or AC drills. Blades are easily replaced. Limited lifetime manufacturer's defect warranty. Made in USA.

Supercoup NR1 Nibbler Shears Mini-Nibbler Cuts Metal Without Distortion - Compound leverage action makes cutting much easier than with snips. Starts in the middle of a panel with a 1/4" hole. Jaws are made from hardened steel and are replaceable in seconds. Cuts up to 22 gauge stainless, 18 gauge steel,.059" copper, brass,.079" PVC,.098" Ploycarbonate. Made in France.

Unique blade and handle design requires less cutting effort than conventional snips. The metal is held firmly by the die while the movable center blade cuts. Starts from a hole as small as 1/4". Jaws are made from heat-treated tool steel and are replaceable in seconds. Cuts up to 16 gauge aluminum, brass, and copper or up to 18 gauge mild steel. Made in France.

Heavy-Duty Air Nibbler - This pneumatic nibbler leaves metal smooth and free from burrs and distortion, Heavy Duty unit cuts up to 18 gauge steel or aluminum. Requires 4 cfm at 90 psi. Imported. One Year Manufacturer's Warranty. Replacement Punch (28096A) and Die (28096B) are available separately.

Cut through aluminum, steel, plastic and fiberglass up to.080" (14 gauge). Ideal for body shop repair, muffler and exhaust work. Adjustable blade guide increases blade life. Cuts straight and tight radius curves on flat and curved surfaces. Requires 5 cfm @ 90-120 psi. 10,000 strokes per minute. One-year manufacturer's warranty. Imported.

"Titanium nitride-coated step drills cut perfectly round 1/8in. to 3/4in. holes. Friction-reducing surface runs cooler and self-lubricates while running dry. Includes one each of #1, #2 and #3 step drills."

STEEL AND ALUMINUM RIVETS For use with all rivet guns Steel rivets have steel mandrels, aluminum rivets have aluminum mandrels, stainless steel rivets have stainless steel mandrels. Short: For work up to 1/8" thick. Medium: For work 1/8" to 1/4" thick. Long: For work 1/4" to 3/8" thick. Extra Long: For work 3/8" to 1/2" thick. Applications: All Makes All Models 3/16" Diameter Shank; 3/8" Head; X-long Length; Box of 500

RIVET NUT AND THREAD-SERT TOOL KITS Choose complete rivet nut and thread-sert kit or 3-in-1 rivet/rivet nut/thread-sert tool kit Easy, economical alternatives to riveting! CHOICE OF FASTENERS Rivet Nuts. Most cost-effective way to place permanent threads in thin materials! Perfect for metal, fiberglass and rigid plastic which are too thin to support a threaded screw or bolt with the rivet nut. No drilling out rivets to remove fasteners! Drill a hole in panel or wall, thread rivet nut on mandrel of installation tool and insert into hole. Squeezing handle expands the rear of the rivet nut and locks it in place?ready for insertion of machine screw. Large diameter head allows use in soft materials with little thread strength and to provide the most bearing surface. Threading resists high loads, prevents loosening under vibration. Look neat. Thread-Serts. Best for use with thin or thick materials! Ideal for use in any material at least 3/32" thick. Eliminate need for tapping and welding. Thread-Serts feature an upper sleeve and a base, both with internal and external threads. During installation, base is drawn upwards inside the sleeve, forcing 360? contact between sleeve and application material. Easy?all you need is installation tool and drilled or punched hole. Applications: All Makes All Models

"Heavy–duty steel rivet tool with slim–nose design to fit into tight places. Designed to set 3/32in., 1/8in., 5/32in. and 3/16in. dia. rivets. Includes 60 assorted aluminum rivetsFifteen 3/32in. x 1/8in.Fifteen 1/8in. x 1/8in.Fifteen 5/32in. x 1/8in.Fifteen 3/16in. x 1/8in."

These handy blind holders are used by custom car builders to hold sheet metal parts before final welding. Very easy to use. Drill a 1/8" hole through both pieces and insert fastener. Each one provides nearly 20 lbs holding power and has a grip range of up to 1/4". A side-grip fastener is included for edge work. For panels with flanged edges, use the C-panel holders.

These handy blind holders are used by custom car builders to hold sheet metal parts before final welding. Very easy to use. Drill a 1/8" hole through both pieces and insert fastener. Each one provides nearly 20 lbs holding power and has a grip range of up to 1/4". A side-grip fastener is included for edge work For panels with flanged edges, use the C-panel holders (reach is 2", opening is 3/4").

These handy Blind Holders are used by custom car builders to hold sheet metal parts before final welding. Very easy to use. Drill a 1/8" hole through both pieces and insert fastener. Each one provides nearly 20 lbs. holding power and has a grip range of up to 1/4". A side-grip fastener is included for edge work. For panels with flanged edges, use the C-Panel Holders (19076) (reach is 2", opening is 3/4"). Imported.

The Set of 4 Side Grip Panel Holders feature a 1 1/4" depth with 9/16" maximum opening.